Skip to content
Somra Insurance Agency

Contractors Insurance in Texas: Liability, Work Vans, Workers' Comp and Tools

Get the certificate, get on the job site

Most Texas contractors need four things: general liability, commercial auto for the truck or van, tools and equipment coverage, and workers' comp when the job or the GC asks for it. Somra Insurance Agency quotes all four with GEICO and Progressive, plus other carriers, and sends the certificate your general contractor wants. In most cases, we can bind coverage and issue a certificate of insurance the same day.

Tell us your trade, your ZIP code and what the contract asks for. We'll come back with prices you can compare, in plain words. Call 281‑766‑0619, or fill out the short form. No DOT number or Social Security number needed to get a quote.

Get a quote

A few answers and an agent shops the carriers for you.

Rather talk? Call 281‑766‑0619.

What contractors need

Four policies cover almost every contractor we insure. Most people start with liability, because that's what the GC asks for first, then add the rest as the business grows.

Work pickup with a flatbed and toolboxes

General liability

Pays when your work hurts someone or damages somebody else's property: a ladder falls on a client's car, a leak you caused ruins a floor. It's the policy on almost every certificate request. Most contractors carry $1,000,000 per claim and $2,000,000 total for the year. More on general liability insurance for contractors.

Commercial auto for vans and pickups

Your personal auto policy can deny a claim if the truck is used for work. A commercial policy covers the van or pickup, the people who drive it, and the damage it does on the way to the job. See commercial auto insurance for contractors.

Workers' comp

Texas lets most private employers go without it, but plenty of GCs won't let you on site without a policy, and public jobs require it. We can set up a policy for a crew or a one-person policy for a sub. Read about workers' comp for Texas contractors.

Tools and equipment

Liability doesn't pay for your own gear. A tools policy, also called inland marine, covers tools and equipment stolen from the truck, damaged at the job or taken from storage. See tools and equipment insurance.

No DOT number needed for vans and pickups under 26,000 lbs

A lot of contractors skip a quote because the form asks for a DOT number they don't have. For most of them, that number isn't required. In Texas, TxDMV requires a motor carrier number for commercial vehicles over 26,000 pounds, for hazmat loads that need placards, and for vehicles built to carry more than 15 passengers. A cargo van, a 2500 or 3500 pickup, or a box truck under that line, working inside Texas, doesn't need one.

Crossing state lines is different. Federal rules start at 10,001 pounds for work trucks that travel interstate, so a heavy pickup pulling a trailer into Oklahoma may need a USDOT number. Tell us where the truck goes and what it weighs loaded, and we'll tell you which applies. Our quote form never asks for a DOT number.

Which number a work truck or van needs
26,000 lbs or less, staying in Texas
No motor carrier number
Over 26,000 lbs, in Texas
TxDMV motor carrier number
Over 10,000 lbs, crossing state lines
May need a USDOT number

Trades we insure

Every trade is priced a little differently, because every trade has different claims. These are the contractors we quote most often. If yours isn't here, call anyway. We probably write it.

Roofing crew working on the roof of a brick house
Handyman
Small jobs, lots of them, often in people's homes. Liability is the core policy. Carriers ask what work you do and don't do, so a clear list of your services gets a better price than a vague one.
Roofing
Roofers pay more than most trades because falls and water damage lead to bigger claims. Carriers look at residential vs. commercial work, steep-slope work and how many years you've been in business. We shop roofing with several carriers because the price spread is wide.
Plumbing
The biggest plumbing claims are water damage after the job is done. Completed-operations coverage inside your general liability is what pays for those, so we check that it's there and at the limit your contracts ask for.
HVAC
Texas requires licensed air conditioning and refrigeration contractors to carry general liability. TDLR sets the minimum at $100,000 per occurrence for a Class B license and $300,000 per occurrence for Class A, with matching completed-operations and aggregate limits. Most GCs ask for more, so we usually quote $1,000,000.
Electrical
TDLR requires licensed electrical contractors to carry general liability of at least $300,000 per occurrence, $600,000 aggregate and $300,000 for products and completed operations. The same license application asks for proof of workers' comp or a notice that you've chosen not to carry it.
Landscaping and lawn care
Landscapers need liability for thrown rocks and damaged irrigation, auto for the truck and trailer, and tools coverage for mowers and equipment. Our landscaping insurance guide goes through each one.
General contractors
GCs carry their own liability and also collect certificates from every sub. We help with both sides: your own policy, and checking that your subs' certificates name you the way your contract says.
Painters and remodelers
Interior work in occupied homes means property damage is the main risk. Carriers price painters and remodelers on payroll or revenue, and on how much of the work is done by subs.

Texas insurance requirements for contractors

Texas doesn't require most private employers to have workers' compensation. That surprises people who've worked in other states. But private employers who contract with government entities must provide workers' comp for the employees working on the project, and many general contractors write it into their subcontracts.

Going without it has a cost. An employer without coverage can't argue in court that the injured worker's own negligence, a co-worker's negligence, or the worker knowingly accepting a danger caused the injury. Employers who opt out also file an annual notice with the Texas Division of Workers' Compensation, post notices at work, and tell new hires in writing.

Licensed trades have their own rules. TDLR sets liability minimums for HVAC and electrical contractors, and the license application asks for a certificate of insurance. Beyond the state, the contract is usually the real requirement. GCs and property managers commonly ask for $1,000,000 per occurrence, $2,000,000 aggregate, commercial auto, and workers' comp or a signed waiver. Send us the insurance page of the contract and we'll match the policy to it line by line.

Our Texas contractor insurance requirements guide goes deeper on each rule.

Certificates, additional insured and waiver of subrogation

A certificate of insurance, usually an ACORD 25 form, is the one-page proof the GC keeps on file. It shows your carrier, your policy numbers, your limits and the dates. It costs you nothing, and we send it straight to whoever asked for it.

Most contracts ask for two more things on that certificate. Additional insured status lets the GC or property owner claim under your liability policy for your work. A waiver of subrogation means your carrier won't sue them to get its money back after a claim. Both are endorsements on your policy, and the certificate only counts if the endorsement is really there. We add them before we issue the certificate, not after.

Existing clients can request certificates any time. In most cases, we can issue a certificate of insurance the same day.

Framers working on a new house at a job site

What contractors insurance costs in Texas

General liability
$152 a month
Workers' comp
$306 a month
Commercial auto
$254 a month

Insureon, Texas general contractors who bought through its platform

Published averages give you a starting point. Insureon reports that Texas general contractors who bought through its platform paid an average of $152 a month for general liability, $306 a month for workers' comp and $254 a month for commercial auto. The Hartford puts the national average for construction businesses at about $1,351 a year, or $113 a month, for general liability.

Your price moves with a few things: your trade, your revenue or payroll, how many years you've been in business, your claims history, the limits your contracts ask for, and your trucks and drivers.

A one-person handyman pays far less than a roofing crew. A driver with tickets can cost more on the auto policy than the truck itself.

The cheapest contractor insurance is the one priced by several carriers for your exact trade. That's the reason to use an independent agent. We run the numbers with more than one carrier and show you what each one covers, not only the price. Vin's rule is value over price: the cheapest policy that leaves out completed operations or the endorsement your GC asked for isn't cheap when the job gets held up.

How getting insured with us works

Most contractors are covered in a day or two.

Here's what happens after you reach out.

  1. 1. Tell us about the work

    Your trade, your ZIP code, your yearly revenue, how many people work for you, and the vehicles you drive. If a GC sent you insurance requirements, send those too. That page tells us exactly what the policy has to show.

  2. 2. We shop it

    We run your details with GEICO and Progressive, plus other carriers that write your trade. Then we lay the quotes side by side: price, limits and deductibles, plus what each one leaves out. You'll hear from a person, not an automated email.

  3. 3. You pick, we bind

    Choose the option that fits. We bind the coverage, add any additional insured or waiver endorsements the contract needs, and send the certificate to your GC. In most cases, that happens the same day.

  4. 4. We stay on it

    When you add a truck, hire someone or land a bigger job, call and we update the policy. At renewal we shop it again so the price stays honest. Contractors tend to stay with us for years, and we'd like to keep it that way.

Why contractors pick Somra

Vin Somra has been writing insurance since 2014. Today Somra Insurance Agency looks after 465 policyholders and has earned 108 five-star reviews. We're appointed with GEICO and Progressive and quote other carriers too, so you get more than one price.

We keep extended hours and work weekends. Phone call or email. We know you're busy, so reach out to us however it best fits into your life. And when a claim comes, we stay on it with you, so you're not left high and dry.

Since2014

Over a decade of experience insuring working people.

465policyholders

Contractors, truckers and Texas families.

108five-star reviews

From clients who've called us for quotes, certificates and claims.

Dallas-Fort Worth contractors

Working in DFW? Our contractors insurance Dallas page covers local GC requirements and the cities we serve.

Contractors insurance questions

Get your contractor quote

Send your trade, your ZIP code and what the contract asks for. We'll shop it and call you back, usually the same day. Or call 281‑766‑0619 and talk to Vin.